Type 1：Simulator without LCD screen without accessories

Type 2：Simulator without LCD screen with accessories

Type 3：simulator with LCD screen without accessories

Type 4：simulator with LCD screen and accessories

Type 5：5-SAE-J1939 simulator
Type 1 to type 4: Passenger car agreement only
Type 5: J1939 protocol only,for  commercial vehicle such as bus, truck 

NOTE: This OBD simulator is independently developed by the store for testing of connected car products, testing of HUD products, and developing and using in research institutes of universities. The hardware shields the ready status and completes the status data. It cannot be used in car inspection and other industries. Do not disturb the car inspection purpose!

The car ECU/OBD simulator was developed by first-line automotive electronics engineers, simulating the standard car OBD communication protocol, and can be used in HUD head-up display industry, car networking industry, racing watch development company, etc. to do research and development, and replace real car OBD in the test phase. To achieve the same effect as in the actual vehicle test. Save the company's cycle and cost for developing automotive electronic products!   Supported protocols: 1,ISO15765-4 11BIT 500k; 2,ISO15765-4 11BIT 250k; 3.ISO15765-4 29BIT 500k; 4.ISO15765-4 29BIT 250k; 5.ISO9141-2; 6,ISO14230-4 KWP2000 5BPS 7,ISO14230-4 KWP2000 FAST  

The picture above shows the simulator with a 3.2-inch LCD screen

Support data item simulation   1. Support real-time simulation of 12 vehicle parameters through the knobs/keys of the machine  Support vehicle speed simulation; Support speed simulation; Support coolant temperature simulation (water temperature simulation); Support intake air temperature simulation; Support intake air flow simulation; Support intake manifold pressure simulation; Support the simulation of the absolute position of the throttle; Support ignition advance angle simulation; Support engine load simulation; Support remaining oil volume simulation; Support fault code simulation; Support frame number simulation;    2. After connecting to the computer via the USB data cable, it supports the simulation of the remaining 140 vehicle parameters. For details, see the OBD simulator data manual.  Data manual link: https://pan.baidu.com/s/1u03C0aC_K-zDsnkzgmfEqg 

Extraction code: 0geg