Citizen movement numbers are located on the back of your watch case. It is usually in XXXX-YYYY format with "XXXX" being the movement number. In this example photo, the "C650" is the movement number. Use this movement number as a reference to find the correct capacitor.
The movement number is also inscribed on the back of the watch movement which is located inside the watch case.
Installation Guide:
- Do not try to test the voltage for this capacitor as this may result in damage. This is a rechargeable battery so it will fully charge by kinetic or solar power (depending on your watch).
- Open the case back
- Install the new capacitor in the same way as the old capacitor was installed. Take note of the positioning of the capacitor
Tips:
- For Kinetic watches: The watch rotor in your watch movement needs to be rotated about 400 revolutions to store enough power. Wear your watch and walk about 1720 meters (0.5 miles) or until the watch starts operating normally again.
- For Solar watches: Place the watch in direct, strong sunlight or under a strong fluorescent light at a distance of about 20 cm or 8 inches until the watch starts operating normally again.
- If you watch does not operate normally, double check the installation. A factory watch reset usually solves many problems. Please refer to your instruction manual.
ABOUT YOUR ORDER
0 Comment
Leave Comment