Application of waterproofing (hydroinsulation), impregnating (release) oils for shuttering boards. Application of waterproofing. Agrekom 20l - Aggregate with plastering and paint spray gun. We are the manufacturer of pneumatic plaster spray units, paint spray units, whitewash spray units and sprayers.
1659.00$
Agrekom 20l - Aggregate with plastering and paint spray gun
The spray unit is designed for:
- Application of acrylic, silicate, silicone, mineral plasters, so called structural plasters / knockdown textures
- Application of gypsum plasters (machine-applied, lightweight, acoustic, moisture-resistant, reinforced) and clay plasters
- Application of gypsum finish coat (traditional, light, reinforced)
- Application of adhesives on mesh for thermal insulation
- Application of cement-lime plaster, scratch coat (cement-lime base coat)
- Painting with all thick emulsions and varnishes (acrylic, alkyd, epoxy, polyurethane, vinyl, synthetic, chlorinated rubber paints) and application of spray-on wallpapers (acrylic, latex, silicone, mineral, structural)
- Impregnation of wood, application of fire retardants, priming, spraying of anti-fungal preparations
- Application of waterproofing (hydroinsulation), impregnating (release) oils for shuttering boards
Agrekom® pressure tank:
- Capacity: 20 L / 32 kg mass (5,3 gal / 70,55 lbs)
- Construction material: Stainless steel 304
- Bottom outlet: yes
- Maximum operating pressure: 8 BAR (116 PSI)
- Material feed range: 15 m (50 ft)
- Tank and gun pressure can be adjusted independently
- Filler diameter: 9,8 cm (3,8 in)
- Tank dimensions with wheels: 20 x 70 cm (7,8 x 27,5 in)
- Weight: 9,4kg (20 lbs)
The Agrekom® AK-10 PRO industrial plastering gun is designed for:
- Application of acrylic, silicate, silicone, mineral plasters, so called structural plasters / knockdown textures
- Application of gypsum plasters (machine-applied, lightweight, acoustic, moisture-resistant, reinforced) and clay plasters
- Application of gypsum finish coat (traditional, light, reinforced)
- Application of adhesives on mesh for thermal insulation
- Application of cement-lime plaster, scratch coat (cement-lime base coat)
- Application of waterproofing
- Application of spray-on wallpapers (acrylic, latex, silicone, mineral, structural)
Specification:
- Spray width: 50 cm (20 in)
- Air shut off with the trigger of the gun
- Needle: 2,5mm (optional 3,0 mm)
- Nozzle size: 4, 6, 8, 10, 12(mm)
- AIR RPO nozzle size: 4, 6, 8(mm)
The Agrekom® MF-77 industrial paint gun is designed for:
- Painting with all thick emulsions and varnishes (acrylic, alkyd, epoxy, polyurethane, vinyl, synthetic, chlorinated rubber paints)
- Impregnation of wood, application of fire retardants, priming, spraying of anti-fungal preparations
- Impregnating (release) oils for shuttering boards
Specification:
- Spray width: 55 cm (22 in)
- Spray width adjustment: yes
- Air flow control: yes
- Nozzle: 2,5 mm (optional 3,0 mm)
The set includes:
- 20-litre 8 BAR tank with top outlet, double pressure regulator and black safety flange
- Agrekom® AK-10 PRO industrial plastering gun with nozzle set 4, 6, 8 mm
- Agrekom® MF-77 industrial paint gun
- 5 m (16 ft) material hose for plastering gun
- 5 m (16 ft) material hose for paint gun
- 5 m (16 ft) air hose for guns
- Funnel
Optionally it is possible to increase the length of the hoses for individual guns to 10 linear metres (32 ft)
Optionally it is possible to increase the length of the hoses to 15 linear metres for the following tanks: 60, 80, 110 l (16, 21 or 29 gal)
Manufacturer
Direct
Door-2-door
Warranty
Highest
Quality
24 Hour
Shipping
Professional
Guidance
About Agrekom®
We are the manufacturer of pneumatic plaster spray units, paint spray units, whitewash spray units and sprayers. Our equipment helps to complete practically every stage of a renovation or construction work faster. Agrekom plaster and paint spray units work perfectly when spraying plaster, applying render and also when painting and whitewashing. We try our very best to make our products precisely match the needs of builders. Attention to detail and high quality equipment are why our users on the Polish and foreign markets appreciate us. Your trust is important to us - we manufacture for you!
Our units have CE Certification in accordance with the 2006/42/EC Machinery Directive, and the 2014/68/EU European Pressure Equipment Directive (PED). All our products are compliant with the basic requirements of EU directives and harmonised standards.
Returns and complaints
Cancellation of the Sales Agreement In the following section, 'we', 'our' and 'us' means the Guarantor, and 'you' and 'your', the Buyer. A Consumer or Trader with Consumer rights that has made a purchase in our online store may, without any reason, cancel the sales agreement within 30 days from the delivery of the product. A Consumer or Trader with Consumer rights may cancel the sales agreement by completing a statement of cancellation.
The statement can be sent by post to:
TG GROUP so. z o.o.
Al.Wolności 22
41-219 Sosnowiec Poland
oder per Email an folgende Adresse: [email protected]
© All rights reverved!
Design: 
Art Delarte
| Brand | Agrekom |
| Type | Drywall Panel |
| Country/Region of Manufacture | Poland |
0 Comment
Leave Comment